WakilXL, Safety Data, Seed Treatments, Syngenta Crop Protection

SEED TREATMENTS

SAFETY DATA

1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND COMPANY OR UNDERTAKING
IDENTIFICATION OF THE SUBSTANCE OR PREPARATION
Tradename WAKIL XL
Design Code A9873C
AGI Code 28779/30045

COMPANY IDENTIFICATION
Company
Syngenta Crop Protection UK Ltd
CPC4, Capital Park, Fulbourn, Cambridge CB21 5XE
Phone (01223) 883400
Fax (01223) 882195
Website www.syngenta-crop.co.uk
Emergency Phone +44 (0)1484 538444 (24h)

2. COMPOSITION/INFORMATION ON INGREDIENTS
HAZARDOUS COMPONENTS

CAS-NO.: 70630-17-0
EC-NO.: -
CHEMICAL NAME: metalaxyl-M
CONCENTRATION (%W/W): 17.5
HAZARD SYMBOLS: Xn
RISK PHRASES (R): 22,41

CAS-NO.: 57966-95-7
EC-NO.: 261-043-0
CHEMICAL NAME: cymoxanil
CONCENTRATION (%W/W): 10
HAZARD SYMBOLS: N,Xn
RISK PHRASES (R): 22, 43, 50/53

CAS-NO.: 131341-86-1
EC-NO.: -
CHEMICAL NAME: fludioxonil
CONCENTRATION (%W/W): 5
HAZARD SYMBOLS: N
RISK PHRASES (R): 50/53

CAS-NO.: 5949-29-1
EC-NO.: 201-069-1
CHEMICAL NAME: 1,2,3-propanetricarb oxylic acid, 2-hydroxy-, monohydrate
CONCENTRATION (%W/W): 1-5
HAZARD SYMBOLS: Xi
RISK PHRASES (R): 36

CAS-NO.: 14807-96-6
EC-NO.: 238-877-9
CHEMICAL NAME: talc (Mg3H2(SiO3)4)
CONCENTRATION (%W/W): 10-20
HAZARD SYMBOLS: -
RISK PHRASES (R): -

For the full text of the R phrases mentioned in this section, see section 16.

3. HAZARDS IDENTIFICATION
Harmful to aquatic organisms, may cause long-term adverse effects in the aquatic environment. Contains cymoxanil. May produce an allergic reaction. May form flammable dust-air mixture.

4. FIRST AID MEASURES
General advice: Have the product container, label or Material Safety Data Sheet with you when calling the Syngenta emergency number, a Poison Control Centre or physician, or going for treatment.

Inhalation: Remove to fresh air. If breathing is irregular or stopped, administer artificial respiration. Keep patient warm and at rest. Call a physician or Poison Control Centre immediately.

Skin contact: Take off all contaminated clothing immediately. Wash off immediately with plenty of water. If skin irritation persists, call a physician. Wash contaminated clothing before re-use.

Eye contact: Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Remove contact lenses. Immediate medical attention is required.

Ingestion: If swallowed, seek medical advice immediately and show this container or label. Do not induce vomiting.

Medical advice: There is no specific antidote available. Treat symptomatically.

5. FIRE FIGHTING MEASURES
SUITABLE EXTINGUISHING MEDIA
Extinguishing media – small fires: Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
Extinguishing media – large fires: Use alcohol-resistant foam or water spray.
Extinguishing media which must not be used for safety reasons: Do not use a solid water stream as it may scatter and spread fire.
Specific hazards during fire fighting: As the product contains combustible organic components, fire will produce dense black smoke containing hazardous products of combustion (see section 10). Exposure to decomposition products may be a hazard to health.
Special protective equipment for firefighters: In the event of fire, wear self-contained breathing apparatus.
Further information: Do not allow run-off from fire fighting to enter drains or water courses. Cool closed containers exposed to fire with water spray.

6. ACCIDENTAL RELEASE MEASURES
Personal precautions: Refer to protective measures listed in sections 7 and 8. Avoid dust formation.
Environmental precautions: Do not flush into surface water or sanitary sewer system.
Methods for cleaning up: Pick up and arrange disposal without creating dust. Do not create a powder cloud by using a brush or compressed air. Clean contaminated surface thoroughly.
Additional advice: If the product contaminates rivers and lakes or drains inform respective authorities.

7. HANDLING AND STORAGE
HANDLING
Advice on safe handling: This material is capable of forming flammable dust clouds in air, which, if ignited, can produce a dust cloud explosion. Flames, hot surfaces, mechanical sparks and electrostatic discharges can serve as ignition sources for this material. Electrical equipment should be compatible with the flammability characteristics of this material. The flammability characteristics will be made worse if the material contains traces of flammable solvents or is handled in the presence of flammable solvents. Avoid contact with skin and eyes. When using, do not eat, drink or smoke. For personal protection see section 8.

STORAGE
Requirements for storage areas and containers: Keep containers tightly closed in a dry, cool and well-ventilated place. Keep out of the reach of children. Keep away from food, drink and animal feed.
Other data: Physically and chemically stable for at least 2 years when stored in the original unopened sales container at ambient temperatures

8. EXPOSURE CONTROLS/PERSONAL PROTECTION
COMPONENTS WITH WORKPLACE CONTROL PARAMETERS
Components: metalaxyl-M
Exposure limit(s): 10 mg/m3
Value type: 8 h TWA
Source: SYNGENTA

Components: cymoxanil
Exposure limit(s): 2 mg/m3
Value type: 8 h TWA
Source: SUPPLIER

Components: fludioxonil
Exposure limit(s): 10 mg/m3
Value type: 8 h TWA
Source: SYNGENTA

Components: talc (respirable dust)
Exposure limit(s): 1 mg/m3
Value type: 8 h TWA UK
Source: EH40/2002

ENGINEERING MEASURES
Containment and/or segregation is the most reliable technical protection measure if exposure cannot be eliminated. The extent of these protection measures depends on the actual risks in use. If airborne dust is generated, use local exhaust ventilation controls. Assess exposure and use any additional measures to keep airborne levels below any relevant exposure limit. Where necessary, seek additional occupational hygiene advice.

PERSONAL PROTECTIVE EQUIPMENT
When using this product refer to the label for details. In all other cases, use the following Personal Protective Equipment:

Protective measures: The use of technical measures should always have priority over the use of personal protective equipment. When selecting personal protective equipment, seek appropriate professional advice. Personal protective equipment should be certified to appropriate standards.

Respiratory protection: No personal respiratory protective equipment normally required. A particulate filter respirator may be necessary until effective technical measures are installed.

Hand protection: Chemical resistant gloves are not usually required. Select gloves based on the physical job requirements.

Eye protection: Eye protection is not usually required. Follow any site specific eye protection policies. Eye/face protection should be certified to EN 166.

Skin and body protection: No special protective equipment required. Select skin and body protection based on the physical job requirements.

9. PHYSICAL AND CHEMICAL PROPERTIES
Form: Granules.
Colour: Light red to dark red.
Odour: Weak.
pH Value: 4–8 at 1% w/v
Flammability (solid, gas): Not highly flammable.
Minimum Ignition Energy: < 1 J
Oxidising Properties: Not oxidising.
Explosive Properties: Not explosive.
Bulk Density: 0.4–0.6 g/cm3
Water Solubility: Miscible.
Solubility in Other Solvents: Not soluble.
Surface Tension: 27.9 mN/m at 20°C

10. STABILITY AND REACTIVITY
Hazardous decomposition products: Combustion or thermal decomposition will evolve toxic and irritant vapours.

Hazardous reactions: None known. Hazardous polymerisation does not occur. Stable under normal conditions.

11. TOXICOLOGICAL INFORMATION
Acute Oral Toxicity LD50: > 2000 mg/kg (rat).
Acute Dermal Toxicity LD50: >2000 mg/kg (rat).
Acute Skin Irritation: Non irritant (rabbit).
Acute Eye Irritation: Non irritant (rabbit).
Skin Sensitisation: Not sensitising (guinea pig).
Long Term Toxicity: Did not show carcinogenic, teratogenic or mutagenic effects in animal experiments.

12. ECOLOGICAL INFORMATION
ELIMINATION INFORMATION (PERSISTENCE AND DEGRADABILITY)
Bioaccumulation: Cymoxanil and metalaxyl-M have low potential for bioaccumulation. Fludioxonil does not bioaccumulate.
Stability in water: Cymoxanil and metalaxyl-M are not persistent in water. Fludioxonil is stable in water.
Stability in soil: Cymoxanil, fludioxonil and metalaxyl-M are not persistent in soil.
Mobility: Cymoxanil has medium mobility in soil. Fludioxonil has low mobility in soil. Metalaxyl-M has a range from low to very high mobility in soil depending on soil type.

ECOTOXICITY EFFECTS
Toxicity to Fish: LC50 Oncorhynchus mykiss (rainbow trout), 11 mg/l , 96 h.
Toxicity to Aquatic Invertebrates: EC50 Daphnia magna (water flea), 47.9 mg/l , 48 h.
Toxicity to Algae: EbC50 Scenedesmus subspicatus (green algae), 5.2 mg/l , 72h.
Toxicity to Algae: ErC50 Scenedesmus subspicatus (green algae), 11 mg/l , 72h.

13. DISPOSAL CONSIDERATIONS
Product: Do not contaminate ponds, waterways or ditches with chemical or used container. Do not dispose of waste into sewer. Where possible recycling is preferred to disposal or incineration. If recycling is not practicable, dispose of in compliance with local regulations.
Contaminated packaging: Empty remaining contents. Triple rinse containers. Empty containers should be taken for local recycling or waste disposal. Do not re-use empty containers.

14. TRANSPORT INFORMATION
LAND/SEA/AIR(RID/ADR/IMDG/IATA): Not classified as dangerous goods

15. REGULATORY INFORMATION
Risk phrases (R)
52/53
Harmful to aquatic organisms, may cause long-term adverse
effects in the aquatic environment.

Safety phrases (S)
2
Keep out of reach of children.
13
Keep away from food, drink and animal feeding stuffs.
20/21
When using do not eat, drink or smoke.
35
This material and its container must be disposed of in a safe way.
37
Wear suitable protective gloves.

Special label To avoid risks to man and the environment, comply with the instructions for use. Contains cymoxanil. May produce an allergic reaction.

16. OTHER INFORMATION
Based upon SDS release date 26.09.2005 version 5. DPD compliant. This edition contains
major updates to every section except sections 1, 14 and 15. (a) addition of ‘(rabbit)’ in section 11.

Always read the label. Use pesticides safely.
Product approval number: MAPP 10562.
bText of R phrases mentioned in Section 2:

R22 Harmful if swallowed.
R36 Irritating to eyes.
R41 Risk of serious damage to eyes.
R43 May cause sensitisation by skin contact.
R50/53 Very toxic to aquatic organisms, may cause long-term adverse effects in the aquatic
environment.

The information provided in this Safety Data Sheet is correct to the best of our knowledge, information and belief at the date of its publication. The information given is designed only as a guidance for safe handling, use, processing, storage, transportation, disposal and release and is not to be considered a warranty or quality specification. The information relates only to the specific material designated and may not be valid for such material used in combination with any other materials or in any process, unless specified in the text.

Product Guide

Beyond the Label

Media

Social Media

SEED TREATMENTS